Book Appointment

 

The article author is making a number of great pointers relating to Hot Water Heater Repair in general in this article just below.

Many modern homes make use of an electric water heater for their heating unit, as a result of its benefit as well as ease of use. Nevertheless, just like any other electrical devices, troubles may develop with its use, suddenly. It can be really aggravating to wake up to a cold shower as opposed to a warm one or having your bathroom with water that isn't hot sufficient or even too hot. Whatever the situation might be, water heater issues can be fairly nerve-racking. The good news is, we've made a list of feasible options to your water heater problems. There are a number of elements that can cause most of these troubles, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you turn off the major power supply for safety and security. Whatever the trouble is, getting it dealt with must not position too much of an issue if you adhere to these steps:

 

Call A Professional:

If after changing all defective parts and also resetting your temperature, the hot water heater still isn't working, you may require to get in touch with a specialist plumber for an expert point of view. The issue with your heating unit could be that the cold and hot faucets have actually been switched over or it might be undersized for the quantity of hot water required in your home. Whatever the situation might be, a professional plumber would certainly assist fix the trouble.

 

Check Your Power Supply:

As basic as this might seem, it is really essential. Without appropriate power, your water heater will not work. So the first thing to do when your water instantly retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, just turn it off and on once more. Change any kind of busted or damaged fuse. Check the home appliance with power after these modifications to see if it's now functioning.

 

Inspect Your Thermostat:

If your water heater still isn't functioning or the water coming out isn't hot sufficient, you may require to inspect the temperature setups on your upper thermostat. Make certain the circuit breaker is turned off before doing anything. Open up the gain access to panel and press the red switch for temperature level reset above the thermostat. This ought to assist heat the water. Turn the circuit breaker back on and also check if the problem has been fixed.

 

Check the Burner in the Water Heater:

If it's not a power issue, then attempt having a look at your heating element if it is still functioning. Evaluate each of your heating elements to ensure the issue isn't with any of them. If any one of them is defective, replace that part and after that examine whether the warm water is back on.

 

Verdict

Hot water heater troubles are not constantly significant. Most of them result from small problems like a blown fuse or worn-out heating element. Replacing the faulty components should do the trick. However, if you are still unable to resolve the problem, give a call to your nearby plumber ahead to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I recently found that blog post on Hot Water Heater Repair when doing a lookup on the search engines. Are you aware of another individual who is inquisitive about the topic? Take a moment to promote it. I enjoy reading our article about What Would Cause My Electric Water Heater to Stop Working?.

Address leaks promptly.